Benro Video Tripod A3573FS6 Pro Fluid Head

18,490.00

Short Description

Key Features:

  • Base Diameter: 65mm
  • Drag Control Pan: Continuous / Tilt: Continuous
  • Drag Type: Fluid
  • Vertical Tilt: +90° to -75°
  • Panning Range: 360°
  • Independent Pan Lock: Yes
  • Independent Tilt Lock: Yes
  • Load Capacity: 5.99 kg
  • Counter Balance: Incremental 5-Step Plus 0
  • Materials: Aluminium, Magnesium
  • Weight: 1.63 kg
Detailed Description

The A3573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head from Benro is a versatile system supporting up to 13.2 lb loads. It has a compact design with single-tube legs, and it features a 65mm flat base that allows moving the head from the tripod directly to sliders, jibs, and other support gear.

The S6Pro head offers 5+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°.

Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won’t slip out if you move it in either direction too much. Two camera screws are supplied—1/4″-20 and 3/8″-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there’s a 1/4″-20 threaded hole on each side of the head to which you can secure articulating arms.

The A3573F is a 2-stage/3-section tripod featuring a flat base center column. With the head attached, the tripod reaches a maximum height of 71″ when the column fully extended. With the column retracted, it stands at approximately 64″ maximum. The minimum height is 17.5″, which is an advantageous low height that isn’t common among most tripods. At this height, you can set up the tripod for low angle shots in time-lapse and other applications. Each leg of the tripod is independently adjustable into three positions. Being able to snap the legs into one of these three positions will let you set up quickly and efficiently. Making things even more efficient, the center column has a leveling adapter so that you can adjust the position of the fluid head without having to adjust the tripod legs. The center column also has a weight hook for sandbags and other loads you can hang off of it for additional stability. The A3573F tripod features rubber and spiked feet for use on virtually all types of terrain.